Specific
| Accessories | High pressure shock pump |
|---|
| Bottom bracket | SRAM BB30 |
|---|
| Brake levers | Magura MT4 BAT |
|---|
| Brake rotor | Magura, Storm SL, 180/180mm |
|---|
| Brakes | Magura MT4, hydraulic disc |
|---|
| Cassette | SRAM PG-1030, 11-36, 10-speed |
|---|
| Chain | KMC X10, 10 speed |
|---|
| Crankset | SRAM S1400 AM, BB30, 36/22T |
|---|
| Features | Travel:
80mm to 130mm on-the-fly adjustable rear travel. 130mm front.
Lefty SuperMax:
The most torsionally rigid suspension fork ever made, the SuperMa x brings unheard-of levels of steering precision to longer travel 29'ers. The unique 60mm offset helps increase both high speed stability and low speed agility - perfect for Trigger 29's full-throttle attitude.
Dyad RT2:
The DYAD shock provides the same two-shocks-in-one benefits and performance of the Jekyll, but dialed for the Trigger 29: shorter travel (80mm) ELEVATE mode delivers near race-bike efficiency, while the longer travel FLO W (130mm) mode offers up a plusher, all-mountain feel.
Attitude adjust:
Switch between modes on the DYAD and the bike’s geometry changes too. Steeper and more nimble in ELEVATE mode, lower and more stable in FLOW mode.
Ballistec Carbon/Smartformed Alloy:
Using fibers developed by the military for ballistic armoring, this high-strength carbon construction process yields a full-carbon frame that's lighter than aluminum and pound-for-pound stronger than steel. The alloy versions use our ultra sophisticated SmartFormed aluminum construction for a frame that's strong yet light.
ECS-TC System:
Clamped, 15mm thru-axles in the shock linkage and swingarm pivot, as well as double bearings at the rear dropouts eliminate flex and provide unmatched center-stiffness for complete control.
Zero Pivot:
The carbon Triggers utilize our flexing Zero Pivot seatstays, which save weight and actually increase lateral stiffness over bearing pivot rear stays.
|
|---|
| Fork type | Fox 34 Float CTD FIT 29, 130mm, 15QR thru axle, 1.5", 51mm offset |
|---|
| Frame type | Trigger 29, 130/80mm, SmartFormed Alloy, BB30, ISCG03, 1.5 Si headtube |
|---|
| Front derailleur | SRAM X7, direct mount |
|---|
| Headset | Tange Seiki 1.5", integrated |
|---|
| Hub front | SRAM X9, 15mm thru axle |
|---|
| Hub rear | SRAM X9, 142x12mm |
|---|
| Rear derailleur | SRAM X9 Type 2 RBC |
|---|
| Recommended for | All Mountain, Enduro |
|---|
| Rims type | WTB ST i23 29 TCS, 32 hole, tubeless ready |
|---|
| Saddle | WTB Volt Comp, Satin Steel |
|---|
| Shifter | SRAM X7 |
|---|
| Shock type | Fox DYAD RT2, 130/80mm adj. travel, 2015 tune |
|---|
| Spokes | DT Swiss Competition |
|---|
| Stem | Cannondale C3, 1.5", 31.8, 5 deg. |
|---|
| Tires | WTB Wolverine TCS, 29x2.2", folding, tubeless ready |
|---|
