Products comparisonBack to search results

Product nameRace Face SIXC 35 35mm Rise (2016)Race Face SIXC 35 35mm RiseDeity Components DC31 Mohawk (2016)Deity Components DC31 MohawkChromag BZA (2016)Chromag BZAEaston Haven 35 (2016)Easton Haven 35
ManufacturerRace FaceDeity ComponentsChromagEaston
CategoryFlat » Handlebars » PartsFlat » Handlebars » PartsFlat » Handlebars » PartsFlat » Handlebars » Parts
Approx. MSRPTBA169,00 € (USD)TBATBA
Average user ratingBe the first to write a reviewBe the first to write a reviewBe the first to write a reviewBe the first to write a review
ColorsBlackBlack With White, Gray, Red, Green, Purple, Blue GraphicsMatte Black/White, Black/Tight Yellow, Black/Tight OrangeGrey, Red, Green, Blue

The 2016 Race Face SIXC 35 35mm Rise is an off-road handlebar. The new design of the SIXC incorporates the recently-introduced 35mm bar diameter standard, which, combined with some big efforts by the engineers at Race Face has resulted in a bar that is both lighter and wider. A full 800mm in width, with the option to cut down to as slender as 750mm, weighing in at 210 grams (almost 100 grams lighter than its aluminum counterpart), and delivering just the right blend of strength and bump tolerance.
A very good off-road 35mm-rise bar.

The 2016 Deity Components DC31 Mohawk is an off-road bar. Near indestructible, this is Deity's toughest carbon handlebar, all unidirectional carbon. Layout is traditional, a 31.8mm clamp zone, 9 degree bend, 5 degree upsweep, and 787mm width. The stem clamp zone is non-slip, offering a firm purchase. The bar offers slight damping, perfect for absorbing vibration, without flex. Available in gloss carbon finish with graphics in a number of bright colors.
A good enduro or downhiller's bar.

The 2016 Chromag BZA is a mountain bike handlebar. Spec'ed out for downhill, the BZA has a 35mm clamp diameter, a full 800mm length, and rider's choice of 15, 25, or 35mm rise. Construction is all unidirectional carbon, weighing in at a very low 220 grams for a full-length bar. Classic 5 degree up, 8 degree bend puts the grips right where they should be. The BZA is available in three color schemes, a monochromatic black and white or one of two vivid combinations.
A good downhill off-road bar.

The 2016 Easton Haven 35 is a top-end off-road bar. The latest Haven has a 35mm clamp diameter; the extra volume permits the use of less carbon for the same strength, allowing the bar to come in at a very slender 188 grams, in low-rise, and a mere 17 grams more in high. Construction is Easton's EC90, exceptionally strong, offering a modicum of dampening, and light. Available in matte carbon with several bright and one muted graphics color options.
A very good off-road bar.






Country of origin






- Manufactured from UD Carbon with matte clearcoat.
- Carbon optimized flex for improved small bump compliance.

- The strongest Downhill/Enduro Carbon Handlebar on the market!
- Designed for DH, Enduro, and All MTN
- Developed and designed exclusively with our own in house Deity molds
- Unidirectional Carbon Construction
- Damping properties reduce hand fatigue
- The ultimate combination of Strength, Weight, and Ride Quality
- Textured non slip stem clamping surface
- Comes equipped with Deity Icon 3D End Plugs

- Premium quality unidirectional carbon weave
- 25% weight saving over aluminum


35mm rise

25mm rise

15mm, 25mm or 35mm rise

9°, 5° UPSWEEP / 20-, OR 40mm RISE

Recommended for

All mountain or enduro

Enduro or downhill


Trails or enduro riders


800mm width

787mm width

800mm / 30.8" wide

750mm width

Now comparing:
    Clear all