Specific
| Bottom bracket | FSA BB30 |
|---|
| Brakes | SRAM Apex dual pivot w/cartridge brake pads |
|---|
| Cassette | SunRace, 11-28T |
|---|
| Chain | SunRace 10-speed |
|---|
| Crankset | FSA Omega BB30, 50/34T; 48cm=165mm, 51cm=170mm, 54cm-56cm=172.5mm, 58cm-61cm=175mm |
|---|
| Features | Inside Out
InsideOut is a revolutionary internally optimized molding process that completely eliminates excess material, and therefore weight, inside the frame tubes and junctions. Placing polyurethane inserts inside the frame during the molding process—especially at the bottom bracket and head tube area—and then applying a precise amount of pressure and heat results in perfectly formed tubes, inside and out.
Control Taper
By using a Control Taper head tube with 1-1/8” upper bearings and 1-1/2” lower bearings, Felt is able to significantly improve front-end stiffness and steering precision without adding weight to the frameset.
Modular Monocoque
Modular Monocoque Construction (MMC) is an advanced carbon fiber manufacturing technique that allows Felt to mold individual sections of the frameset and then join them together. The main advantage of MMC is that it allows each section to be optimized to meet the specific engineering demands of that particular section of the frame.
UHC Performance
UHC Performance is a T700- based blend of raw carbon fiber, which has a tensile strength that’s 7.9 times greater than 3/2/5 titanium and a stiffness rating that’s 3.34 times greater than 6061 aluminum. UHC performance brings the unmatched performance of a Felt carbon fiber bike to more affordable pricing levels than ever before.
|
|---|
| Fork type | Felt Road UHC Performance monocoque fork; 100% Carbon Fiber blades w/ aluminum ControlTaper 1.125" - 1.5" steerer tube, crown, & dropouts |
|---|
| Frame type | Felt Road UHC Performance MMC Carbon Fiber frame w/ 3KP weave, InsideOut internal molding process, aluminum BB30 shell, external cable routing, forged aluminum dropouts & forged replaceable rear derailleur hanger |
|---|
| Front derailleur | SRAM Apex braze-on |
|---|
| Headset | FSA NO.42 1.125" - 1.5" Integrated, w/ aluminum 15mm cone spacer, 2 x 10mm PC headset spacer, 1 x 5mm PC headset spacer, Felt compression device, top cap & 7075 anodized aluminum bolt |
|---|
| Hub front | Felt Road |
|---|
| Hub rear | Felt Road |
|---|
| Rear derailleur | SRAM Rival |
|---|
| Recommended for | Road, Club Ride |
|---|
| Rims type | Mavic CXP 22 |
|---|
| Saddle | Prologo Nago Evo T2.0, Carbon Fiber injected base w/EV2 active density foam & Cro-Mo rails |
|---|
| Shifters | SRAM Apex DoubleTap |
|---|
| Spokes | Stainless steel |
|---|
| Stem | Felt SL 3D forged 6061 aluminum w/custom Cr-Mo bolts, +/-7° rise, Ø31.8mm bar clamp, 48cm=80mm, 51cm=90mm, 54cm=100mm, 56cm=100mm, 58cm=110mm, 61cm=120mm |
|---|
| Tires | Vittoria Zaffiro Slick, 700c x 23c |
|---|
