Bikes » Road » Sport/Performance »
Felt F1 DI2 (2012)
|Size||48, 51, 54, 56, 58, 61cm|
|Accessories||Di2 battery & battery charger, mechanical cable guides|
|Bottom bracket||Felt BB30 Red Zero CNC machined adaptor w/ Grade 3 ceramic by Enduro|
|Brakes||Shimano Dura-Ace Super SLR dual pivot w/ cartridge brake pads|
|Cassette||Shimano Dura-Ace 11-23T|
|Chain||Shimano Dura-Ace 10 speed|
|Crankset||Shimano Dura-Ace, 53/39T; 48cm=165mm, 51cm=170mm, 54cm-56cm=172.5mm, 58cm-61cm=175mm|
This indicates Felt’s exclusive premium quality component
line Devox. Every component with the
Devox name was designed by the same team of engineers responsible for
cutting-edge Felt bikes and technology.
When you see the Felt Devox name, you know that particular part or
component is held to the very highest technological and performance standard.
Internal Cable Routing This indicates the use of flow-through internal cable routing. It reduces wind drag and prevents contaminants from entering and interfering with the function of brake or shifter cables.
Inside Out InsideOut is a revolutionary internally optimized molding process that completely eliminates excess material, and therefore weight, inside the frame tubes and junctions. Placing polyurethane inserts inside the frame during the molding process—especially at the bottom bracket and head tube area—and then applying a precise amount of pressure and hear results in perfectly formed tubes, inside and out.
Control Taper By using a ControlTaper head tube with 1-1/8” upper bearings and 1-1/2” lower bearings, Felt is able to significantly improve front-end stiffness and steering precision without adding weight to the frameset.
Dynamic Monocoque Construction Dynamic Monocoque Construction is a cutting-edge carbon fiber manufacturing technique that allows Felt to mold individual sections of the frameset and then join them with a special co-molding process. The primary advantage of DMC is that it allows each section of the frame to be optimized to meet the specific engineering demands of that particular section of the frame and to fully maximize the benefits of InsideOut technology.
UHC Advanced Ultra Hybrid Carbon Advanced refers to the lightweight, stiff and durable blend of carbon fiber material used in the performance frames bearing the UHC Advanced label. Because the high modulus materials have a higher fiber to resin ratio, these frames are typically about 20% lighter than UHC Performance frames while remaining equally strong stiff. UHC Advanced offers the best combination of value and performance.
DuPont Paint Felt’s DuPont point is the highest quality paint offered on Felt products. Reserved for our top-of-the-line bicycles, DuPont paint offers unparalleled clarity and durability in a multitude of colors.
|Fork type||Felt UHC Ultimate monocoque fork, InsideOut internal molding process, 100% carbon fiber Controltaper 1.125"" --> 1.5"" steerer tube, integrated headset crown race, blades, & dropouts, 304g|
|Frame type||Felt Road UHC Ultimate + Nano DMC carbon fiber w/ 1KP weave, InsideOut internal molding process, carbon BB30 shell, internal Di2 or external mechanical cable routing, carbon fiber dropouts & 7075 CNC machined aluminum replaceable derailleur hanger, 792g|
|Front derailleur||Shimano Dura-Ace Di2 braze-on|
|Headset||FSA Orbit C-40-CF-ACB 1.125"" --> 1.5"" integrated, w/ carbon fiber 15mm conical spacer, 2 X 10mm carbon fiber headset spacer, 1 x 5mm aluminum headset spacer, Felt carbon fiber top cap & 7075 anodized aluminum bolt|
|Hub front||Shimano Dura-Ace forged aluminum loose ball 16H w/ Shimano Dura-Ace quick release|
|Hub rear||Shimano Dura-Ace forged aluminum loose ball w/ 10 speed HG titanium freehub body w/ Shimano Dura-Ace quick release|
|Rear derailleur||Shimano Dura-Ace Di2|
|Recommended for||Road, Club Ride, Elite Club Ride, Road Race|
|Rims type||Shimano WH-7900-C24-TL 24mm deep carbon fiber tubeless compatible clincher, 16H front, 20H rear|
|Saddle||Devox Team Issue w/ 100% 3k carbon fiber weave base, microfiber cover & 3k UHC carbon fiber rails, 159 gm|
|Shifters||Shimano Dura-Ace Di2 STI & SW7972 sprinter shift switches|
|Spokes||Shimano Dura-Ace 16H x 282mm front, 10 x 304mm drive rear& 10 x 306mm non-drive rear bladed aero stainless steel w/ aluminum nipples|
|Stem||Devox 7050 aluminum 3D forged +/-7¡ rise, ¯31.8mm bar clamp, titanium bolts, 118g; 48cm=80mm, 51cm=90mm, 54cm=100mm, 56cm=100mm, 58cm=110mm, 61cm=120mm|
|Tires||Vittoria Diamante Pro Light, 700c x 23c|